BatteryCodebook
Menu

Same size, different electrical family

LR44 vs SR44W / 357

The 11.6 × 5.4 mm envelope matches, but the electrical families do not: Alkaline manganese dioxide / zinc at 1.5 V nominal versus Silver oxide / zinc at 1.55 V nominal. Physical fit is not equivalence.

Same size, different electrical family

The 11.6 × 5.4 mm envelope matches, but the electrical families do not: Alkaline manganese dioxide / zinc at 1.5 V nominal versus Silver oxide / zinc at 1.55 V nominal. Physical fit is not equivalence.

Top profile · Ø 11.6 mm
Side profile · 5.4 mm high
Original proportional profiles. Scale is consistent within this diagram; screen size is not a physical ruler.
Top profile · Ø 11.6 mm
Side profile · 5.4 mm high
Original proportional profiles. Scale is consistent within this diagram; screen size is not a physical ruler.
FieldLR44 / A76 / AG13SR44W / 357
Dimensions11.6 × 5.4 mm11.6 × 5.4 mm
Voltage1.5 V nominal1.55 V nominal
ChemistryAlkaline manganese dioxide / zincSilver oxide / zinc
DrainGeneral-purpose alkaline; sloping discharge profileW: higher-drain profile
RechargeableNo — primary cell; do not recharge.No — primary cell; do not recharge.

Direct answer

This pair is confused because A76/AG13 retail charts often sit beside 357. LR44 is alkaline at 1.5 V nominal; SR44W/357 is higher-drain silver oxide at 1.55 V nominal. The shared 11.6 × 5.4 mm can does not erase chemistry or discharge-profile differences.

Both are 11.6 mm in diameter; heights are 5.4 mm and 5.4 mm. The 11.6 × 5.4 mm envelope matches, but the electrical families do not: Alkaline manganese dioxide / zinc at 1.5 V nominal versus Silver oxide / zinc at 1.55 V nominal. Physical fit is not equivalence.

Do not infer acceptability from fit alone. The device maker’s complete code and current instructions remain authoritative.

Why these codes are confused

LR44 / A76 / AG13 and SR44W / 357 share part of their dimensions, naming pattern or retail context. The table separates the four fields that a one-line cross-reference can hide.

When the alternative may be acceptable

Only when the device or battery manufacturer explicitly permits the alternative after accounting for size, nominal voltage, chemistry and drain behaviour. Otherwise use the specified family. Never stack cells or modify a compartment to compensate for a height difference.