BatteryCodebook
Menu

Conditional substitute

384 vs 392

Both are 7.9 × 3.6 mm silver oxide / zinc cells at 1.55 V nominal, but their drain designations differ (SW: low-drain profile versus W: higher-drain profile). Preserve the device-specified class.

Conditional substitute

Both are 7.9 × 3.6 mm silver oxide / zinc cells at 1.55 V nominal, but their drain designations differ (SW: low-drain profile versus W: higher-drain profile). Preserve the device-specified class.

Top profile · Ø 7.9 mm
Side profile · 3.6 mm high
Original proportional profiles. Scale is consistent within this diagram; screen size is not a physical ruler.
Top profile · Ø 7.9 mm
Side profile · 3.6 mm high
Original proportional profiles. Scale is consistent within this diagram; screen size is not a physical ruler.
FieldSR41SW / 384SR41W / 392
Dimensions7.9 × 3.6 mm7.9 × 3.6 mm
Voltage1.55 V nominal1.55 V nominal
ChemistrySilver oxide / zincSilver oxide / zinc
DrainSW: low-drain profileW: higher-drain profile
RechargeableNo — primary cell; do not recharge.No — primary cell; do not recharge.

Direct answer

384/SR41SW and 392/SR41W both measure 7.9 × 3.6 mm and use silver-oxide chemistry. Their only listed selection difference is the SW low-drain versus W higher-drain designation.

Both are 7.9 mm in diameter; heights are 3.6 mm and 3.6 mm. Both are 7.9 × 3.6 mm silver oxide / zinc cells at 1.55 V nominal, but their drain designations differ (SW: low-drain profile versus W: higher-drain profile). Preserve the device-specified class.

Do not infer acceptability from fit alone. The device maker’s complete code and current instructions remain authoritative.

Why these codes are confused

SR41SW / 384 and SR41W / 392 share part of their dimensions, naming pattern or retail context. The table separates the four fields that a one-line cross-reference can hide.

When the alternative may be acceptable

Only when the device or battery manufacturer explicitly permits the alternative after accounting for size, nominal voltage, chemistry and drain behaviour. Otherwise use the specified family. Never stack cells or modify a compartment to compensate for a height difference.